Rewmar Flexyfix

Ideal for fixing GRP sheet, treads and nosings

COBA Europe > Products > Floor Coverings > Rewmar Flexyfix

Flexyfix is a solvent and water free, rapid curing, ready to use elastic adhesive and is especially suited to bonding flooring accessories in applications where rapid setting is a requirement.
Stair nosings can be fixed without the need for mechanical fixings. (Provided the substrate is stable and sound and sufficient adhesive is applied.)
Flexyfix can be used on all clean, sound and dust free surfaces.
It is suitable for use on both porous and non-porous surfaces.
Easy to apply.
High final bond strength (according to DIN 53504).

Request Price Request Sample

Compare

Parts
Technical Specification
Downloads

Part Number	Size	Colour	Weight (kg)	Price Request
Parts
Part NumberPU45FF	Size290 ml cartridge	ColourWhite	Weight0.517	Price Request Request Price

Technical Specification
Material	MS Polymer
Min. Operating Temperature	-40°C
Max. Operating Temperature	+90°C
UV Resistance	Yes
Installation Method	The adhesive should be applied by means of a caulking gun with a ratio of 18:1
Cleaning Method	Rewmar wipes immediately after application. Tools can be cleaned prior to curing with Rewmar wipes or mechanically after curing
COO (Country of Origin)	UK
Tensile Strength	> 3.5N/mm²
Elongation	>200%
Notes	This product is not suitable for use on Polypropylene, Teflon, Bitumen or Asphalt
Shelf-life	12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°.
Surface preparation	Before application ensure that all surfaces are clean and dust free. There is no requirement to ensure that the surfaces are dry, as this adhesive will work in wet conditions including under water.
Curing system	Moisture curing
Consistency	Paste
Specific gravity (g/cm³)	Approx. 1.5g/mL
Open time at 21°C and 50% R.H	Approx. 5 minutes (This can vary according to environmental circumstances such as temperature, humidity, substrate etc.)
Adjustability time at 21°C and 50% RH	Approx. 5 minutes (This can vary according to environmental circumstances such as temperature, humidity, substrate etc.)
Set to load bearing	Approx. 30 minutes (This can vary according to environmental circumstances such as temperature, humidity, substrate etc.)
Total solids content	100% (solvent free)
Application rate	As an adhesive approx.1.5 m² ( When applied in 10mm bead at 300 mm centres to one surface only.)